D3S Base
Mercury-free xenon lamp – 35 W, 42 V operating, D3S.
Vorteile
- No mercury
- Lower operating voltage (42 V)
- More eco-friendly
- Long lifespan
Nachteile
- Not compatible with D2S ballasts
- Higher price
- Only for compatible vehicles
approx. 40–90 € (each) UVP inkl. MwSt. · Preis kann je nach Händler variieren
D3S Base im Detail
The D3S is the eco-friendly xenon variant without mercury, with 42 V operating voltage. It provides the same light output as D2S with easier disposal.
Technical usage
Application area: Xenon low/high beam (mercury-free). Power: 35 W bei 42 V (operating), Luminous flux approx. 3200 lm. Color temperature: 4200–6000 K.
Dimensions
Base diameter 32 mm, total length approx. 100 mm
History
The D3S is the mercury-free evolution of the D2S. It operates at 42 V instead of 85 V and contains no mercury, easing disposal and reducing environmental impact.
Vehicle classes / sizes
- Mid-size
- Premium
- SUV
- Luxury
Specifications
| Base | PK32d-3 |
| Rated power | 35 W |
| Operating voltage | 42 V |
| Luminous flux | approx. 3200 lm |
| Color temp | 4200–6000 K |
| Lifespan | 2000–3000 h |
| Use | Xenon low/high beam |
| Mercury | No |
Suitable D3S bulbs on Amazon
Popular and proven lamps with this base – research and direct links to Amazon.
Tips for replacement and LED retrofit
- Safety: Ignition off, key removed, let the lamp cool (halogen gets very hot).
- Do not touch the glass: Fingerprints shorten lifespan – use gloves or a cloth.
- LED retrofit: Only with E-mark (ECE R37/R112) allowed, otherwise the operating license is void and glare may result.
- CAN bus errors: With LED the vehicle may report a fault – use LED with CAN-bus resistor or special "canbus" lamps.
- Replace both sides: When one lamp fails, replace the opposite side too to avoid color/brightness differences.
- Extend lifespan: Check voltage stabilization, clean contacts, waterproof caps.
Frequently asked questions about the D3S Base
No, different operating voltage and ballast.