H11 Base
55 W lamp for fog lights and low beam – PGJ19-2 base.
Vorteile
- Versatile
- Polarity-protected
- Good LED choice
Nachteile
- Not as common as H7
- Average lifespan
approx. 8–22 € (pair) UVP inkl. MwSt. · Preis kann je nach Händler variieren
H11 Base im Detail
The H11 is a 55 W halogen lamp with PGJ19-2 base. It is used for fog lights and in some vehicles for low beam. Polarity-protected by asymmetric pin spacing.
Technical usage
Application area: Fog light / low beam. Power: 55 W bei 12 V, Luminous flux approx. 1350 lm. Color temperature: 3200 K (Halogen).
Dimensions
Base diameter 19 mm, total length approx. 60 mm
History
The H11 (PGJ19-2) is a versatile 55 W lamp used both for fog lights and low beam in modern vehicles. It is the 'big sister' of the H8 and shares its base form.
Vehicle classes / sizes
- Compact
- Mid-size
- SUV
Specifications
| Base | PGJ19-2 |
| Rated power | 55 W |
| Rated voltage | 12 V |
| Luminous flux | approx. 1350 lm |
| Color temp (halogen) | approx. 3200 K |
| Lifespan | 400–800 h |
| Use | Fog light, low beam |
| Pins | 2 (asymmetric) |
Suitable H11 bulbs on Amazon
Popular and proven lamps with this base – research and direct links to Amazon.
Tips for replacement and LED retrofit
- Safety: Ignition off, key removed, let the lamp cool (halogen gets very hot).
- Do not touch the glass: Fingerprints shorten lifespan – use gloves or a cloth.
- LED retrofit: Only with E-mark (ECE R37/R112) allowed, otherwise the operating license is void and glare may result.
- CAN bus errors: With LED the vehicle may report a fault – use LED with CAN-bus resistor or special "canbus" lamps.
- Replace both sides: When one lamp fails, replace the opposite side too to avoid color/brightness differences.
- Extend lifespan: Check voltage stabilization, clean contacts, waterproof caps.
Frequently asked questions about the H11 Base
Mechanically yes, but electrically different power – not recommended.