H7 Base
The world's most common low-beam base for cars – 55 W, 12 V, PX26d socket.
Vorteile
- Huge choice of manufacturers and variants
- Easy replacement, usually tool-free
- Cheap and widely available
- LED retrofit possible
Nachteile
- Only one light function per lamp (low OR high beam)
- Limited halogen lifespan (approx. 500–1000 h)
- Glare risk with improper LED retrofit
approx. 8–25 € (pair) UVP inkl. MwSt. · Preis kann je nach Händler variieren
H7 Base im Detail
The H7 is the standard low-beam base in the vast majority of modern passenger cars. At 55 W and 12 V it delivers about 1500 lumens and is available as halogen, LED or xenon retrofit. The PX26d two-pin base ensures precise positioning in the reflector.
Technical usage
Application area: Low beam. Power: 55 W bei 12 V, Luminous flux approx. 1500 lm. Color temperature: 3200 K (Halogen).
Dimensions
Base diameter 26 mm, pin spacing 10.9 mm, total length approx. 58 mm
History
The H7 base was introduced in the 1990s and is today the most widely used low-beam base in passenger cars worldwide. It replaced older dual-filament bases such as H4 in many vehicles, since separate light functions (low/high beam) allow an optimized reflector geometry.
Vehicle classes / sizes
- Compact cars
- Mid-size
- SUV
- Vans
Specifications
| Base | PX26d |
| Rated power | 55 W |
| Rated voltage | 12 V |
| Luminous flux | approx. 1500 lm |
| Color temp (halogen) | approx. 3200 K |
| Lifespan (halogen) | 500–1000 h |
| Use | Low beam |
| Base diameter | 26 mm |
Suitable H7 bulbs on Amazon
Popular and proven lamps with this base – research and direct links to Amazon.
Tips for replacement and LED retrofit
- Safety: Ignition off, key removed, let the lamp cool (halogen gets very hot).
- Do not touch the glass: Fingerprints shorten lifespan – use gloves or a cloth.
- LED retrofit: Only with E-mark (ECE R37/R112) allowed, otherwise the operating license is void and glare may result.
- CAN bus errors: With LED the vehicle may report a fault – use LED with CAN-bus resistor or special "canbus" lamps.
- Replace both sides: When one lamp fails, replace the opposite side too to avoid color/brightness differences.
- Extend lifespan: Check voltage stabilization, clean contacts, waterproof caps.
Frequently asked questions about the H7 Base
Yes, approved LED retrofit lamps with E-mark (e.g. Osram Night Breaker LED) exist. Without E-mark the operating license is void.
Halogen H7 typically lasts 500–1000 operating hours; with daily use about 1–2 years.