H9 Base
65 W high-performance high-beam lamp – PGJ19-5 base, approx. 2100 lm.
Vorteile
- High light output
- Good range
- Robust
Nachteile
- High power consumption
- More heat
- Not for low beam
approx. 10–25 € (pair) UVP inkl. MwSt. · Preis kann je nach Händler variieren
H9 Base im Detail
The H9 delivers 65 W and approx. 2100 lumens – significantly more than H1. It is used exclusively for high beam and requires a suitably rated headlamp.
Technical usage
Application area: High beam. Power: 65 W bei 12 V, Luminous flux approx. 2100 lm. Color temperature: 3200 K (Halogen).
Dimensions
Base diameter 19 mm, total length approx. 60 mm
History
The H9 (PGJ19-5) is a high-output high-beam lamp with 65 W. Developed as a high-performance variant for high beam, it provides more luminous flux than H1 (55 W).
Vehicle classes / sizes
- Mid-size
- SUV
- Premium
- Commercial vehicles
Specifications
| Base | PGJ19-5 |
| Rated power | 65 W |
| Rated voltage | 12 V |
| Luminous flux | approx. 2100 lm |
| Color temp (halogen) | approx. 3200 K |
| Lifespan | 200–400 h |
| Use | High beam |
| Pins | 2 |
Suitable H9 bulbs on Amazon
Popular and proven lamps with this base – research and direct links to Amazon.
Tips for replacement and LED retrofit
- Safety: Ignition off, key removed, let the lamp cool (halogen gets very hot).
- Do not touch the glass: Fingerprints shorten lifespan – use gloves or a cloth.
- LED retrofit: Only with E-mark (ECE R37/R112) allowed, otherwise the operating license is void and glare may result.
- CAN bus errors: With LED the vehicle may report a fault – use LED with CAN-bus resistor or special "canbus" lamps.
- Replace both sides: When one lamp fails, replace the opposite side too to avoid color/brightness differences.
- Extend lifespan: Check voltage stabilization, clean contacts, waterproof caps.
Frequently asked questions about the H9 Base
No, too bright and too hot for low-beam reflectors.