P22d
Low beam
HB4 (9006) Base
55 W low-beam lamp to US standard – P22d base, 9006.
Vorteile
- Matches HB3 high beam
- Robust
- Widespread in SUVs
Nachteile
- Lower light output than H7
- Not in all EU vehicles
approx. 10–25 € (pair) UVP inkl. MwSt. · Preis kann je nach Händler variieren
Beschreibung
HB4 (9006) Base im Detail
The HB4 (9006) is a 55 W halogen lamp for low beam to US standard (P22d). It is the counterpart to the HB3 (9005) high-beam lamp.
Technical usage
Application area: Low beam. Power: 55 W bei 12 V, Luminous flux approx. 1000 lm. Color temperature: 3200 K (Halogen).
Dimensions
Base diameter 22 mm, total length approx. 70 mm
History
The HB4 (9006) is the US-standard low-beam base (P22d) and the counterpart of the HB3. Used in many US imports and SUVs; the low-beam counterpart to the high-beam HB3.
Vehicle classes / sizes
- SUV
- Premium
- US imports
Technische Daten
Specifications
| Base | P22d |
| Rated power | 55 W |
| Rated voltage | 12 V |
| Luminous flux | approx. 1000 lm |
| Color temp (halogen) | approx. 3200 K |
| Lifespan | 300–600 h |
| Use | Low beam |
| Designation | 9006 |
Recommended products
Suitable HB4 (9006) bulbs on Amazon
Popular and proven lamps with this base – research and direct links to Amazon.
Practical tips
Tips for replacement and LED retrofit
- Safety: Ignition off, key removed, let the lamp cool (halogen gets very hot).
- Do not touch the glass: Fingerprints shorten lifespan – use gloves or a cloth.
- LED retrofit: Only with E-mark (ECE R37/R112) allowed, otherwise the operating license is void and glare may result.
- CAN bus errors: With LED the vehicle may report a fault – use LED with CAN-bus resistor or special "canbus" lamps.
- Replace both sides: When one lamp fails, replace the opposite side too to avoid color/brightness differences.
- Extend lifespan: Check voltage stabilization, clean contacts, waterproof caps.
FAQ
Frequently asked questions about the HB4 (9006) Base
No, different base and reflector geometry.